question on Air Cut off Valves
Posted: Tue Jan 22, 2013 10:18 am
Hi All
So I've completely stripped the carbs ready for an ultrasonic bath and I found that the PO has removed all four of the Air Cut off Valves, looking at the forum posts, this would appear to be ok as long as you block the air bleed passages. what will be the result of my set-up, should I install valves or block the bleed?
FYI - I only ran the engine for a moment when I bought the bike as carb 2 was peeing petrol out of the overflow
cheers
Jim
So I've completely stripped the carbs ready for an ultrasonic bath and I found that the PO has removed all four of the Air Cut off Valves, looking at the forum posts, this would appear to be ok as long as you block the air bleed passages. what will be the result of my set-up, should I install valves or block the bleed?
FYI - I only ran the engine for a moment when I bought the bike as carb 2 was peeing petrol out of the overflow
cheers
Jim