I installed a 7.5mm thick spacer in the rear shocks. This corresponds to about two more steps of the rear shock adjustment. Now the rear is acceptable with some luggage but still weak with a passenger.
Below a picture and a drawing of my spacer
Note that the rod of the rear shock is fixed with loctite or so. You'll have to heat it up considerably for disassemble and installation of the spacer. Another option may be a spacer with a cut.
Increase load/carrying capacity?
Re: Increase load/carrying capacity?
- Attachments
-
- CB650C_rear_shock_40.jpg (39.71 KiB) Viewed 4551 times
-
- spacer_rear_shock_CB650C.jpg (90.34 KiB) Viewed 4551 times
Last edited by Volker_P on Tue Nov 16, 2010 1:43 am, edited 1 time in total.
Reason: Picture upload works again: now with pictures
Reason: Picture upload works again: now with pictures
Cosky's great (free) online manual: http://cosky0.tripod.com
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
Re: Increase load/carrying capacity?
Thanks Volker,
Basically what I would like to do is increase the load enough to handel a passenger and some luggage. I'm not really planning on carrying a lot of load but I would like to increase the load capacity by at least 100lbs. I weigh 260 and the load capacity on the bike is only like 360lbs.
Any ideas how much the 12 series shocks and springs from progressive will increase the load capacity?
Thanks
Basically what I would like to do is increase the load enough to handel a passenger and some luggage. I'm not really planning on carrying a lot of load but I would like to increase the load capacity by at least 100lbs. I weigh 260 and the load capacity on the bike is only like 360lbs.
Any ideas how much the 12 series shocks and springs from progressive will increase the load capacity?
Thanks
Return to “Technical Discussion”
Who is online
Users browsing this forum: No registered users and 43 guests